Stan Meyer EPG Gas to Power Electric Particle Generator
Now consider the work with magnetic liquids in California where a drop of magnetic liquid moving through
3 .questions Are the magnetic droplets acting like the neodymium battery train ( homopolar magnet)
and if the copper coil is made into a circular loop and pickup coils placed around the
"track" ( as in the multitier epg) is useful power obtained from the permanently magnetized droplets
it is our belief that Stans Work has been keep secret and being slowly handed out to universities to keep them showing something
I deleted my post regard ElectroStatic Pulsing over Magnetic Pulsing.
After reviewing the thread below...
I understand now that using magnetics is the ideal mode of use of the EPG, but requires the Argon/Cobalt/Nickel, magnetically polarized gas matrix.
I also, reviewed the "House meeting in New Zealand" video where Stan talks about the EPG and the magnetized gas.
I thought for sure that Stan talks about water propulsion on some video...
Maybe I just mis-understood what he was talking about...
Just reviewed the 3rd video of the "House meeting in New Zealand", where he covers the fact that when using laser light within the EPG (He does this to increase the mass of the atomic gas matrix), then, you no-longer need to motivate the gas, because it's the shock wave of the light itself that causes the electrical field generation (which is then caught by the pickup coils), as the electrons move away from the atomic nucleus, which then results is a higher magnetic energy in the gas. Thus, powering all of New Zealand with a single EPG, and entering the relm of OU.
Now, back to the Magnetic Gas Lattice...
Argon (Lubricator, Non Electric, Non Magnetic)
Generate using HV to a pure Cobalt wire.
Generate using HV to a pure Nickel wire.
Generate using HV to a pure Nickel wire.
Generate Cobalt and Nickel Ions using HV within an Argon filled chamber.
- Pass Gas Mixture through VIC and expose to laser energy.
- This destabilizes the Atomic Structures of the main elements in the Gas. So that that we can extract some electrons from them.
- Use electron extraction circuit to remove extra electrons. Now our atoms will be will to take on covalent bonds that they would normally never take on.
- Allow Unstable Gas to stabilize into the new Gas Matrix by making new covalent bonds.
Pump gases into EPG.
Test EPG for appropriate Magnetic Qualities of the Gas Lattice.
- Does pulsing it result in some energy output from the pickup coils?
Damn! That boy was Brilliant!
- Not just theory, but applied science.
- Mechanics, Electronics, Chemistry, Nuclear Physics...
- Amazing stuff!
The Purpose of these pages is for your to quickly see learn and advance further on replicating Stan Meyers to Assist us getting this open source to market
As you experiment share your picture and video on you tube
As a Team we advance fast
the dates on this aprox 2005
and than 2012 there was alot of work done
than recently 2016 , Years are passing we need people working on this
Not all of the early EPG models of Stanley Meyer's devices used mechanical pumps to move
magnetic slurry or gas within the copper spiral cores. One model used linear magnetic drive
pumps to circulate the slurry/gases. The other was the magnetic spin EPG. The six tier multiple
tier EPG (aka "gega series" or (6Tmaggasepg) designed for home power generation also had
similar pumps. The seven tier system is now thought to have had a bottom tier with electronics
for control of the flow of the magnetic gas but not pickup coils
see attached 2 new images of the EPGs
1. Magnetic Spin EPG
2 Magnetic Drive EPG
3 Example Linear Mag Drive
INDEX TO WFC MEMO 418
PREFACE ELECTRICAL PARTICLE GENERATOR
VOLTAGE INTENSIFIER CIRCUIT AA … … PAGE1
OPERATIONAL PARAMETERS …… PAGE 2
VARIABLE AMPLITUDE UNIPOLAR PULSE … … PAGE 3
APPLIED VOLTAGE TO PLATES … … PAGE 4
LC VOLTAGE .… .. PAGE 5
VIC RESISTANCE DUAL-INLINE RLC NETWORK . ….. PAGE 6
VOLTAGE DYNAMIC .… … PAGE 7
VOLTAGE CALCULATIONS … …. PAGE 8
ATOMIC INTERACTION TO VOLTAGE STIMULATION … … PAGE 9
VOLTAGE STIMULATION OF GAS ATOM … .… PAGE 10
LASER INTERACTION ..… … PAGE 11
GAS RESONANT CAVITY … …… PAGE 12
ELECTRON EXTRACTION PROCESS … ……PAGE 13
ATOMIC BONDING OF UNLIKE ATOMS … ……PAGE 14
MAGNETIC GAS LATTICE …… … PAGE 15
ELECTROMAGNETIC ENHANCEMENT …… … PAGE 16
OPERATIONAL PARAMETERS ...… … PAGE 17
INDEX TO FIGURES FIGURE 1-1 VOLTAGE INTENSIFIER CIRCUIT (AA) PAGE 1
FIGURE 1-2 LC CIRCUIT SCHEMATIC PAGE 2
FIGURE 9B VARIABLE AMPLITUDE UNIPOLAR PULSE VOLTAGE PAGE 3
VOLTAGE FREQUENCY SUPER IMPOSED ONTO A 50% DUTY CYCLE PULSE TRAIN
FIGURE 9BB. APPLIED VOLTAGE TO PLATES PAGE 4
FIGURE 1-3. VOLTAGE POTENTIAL DIFFERENCE PAGE 7
FIGURE 1-5. GAS DESTABILIZATION PROCESS PAGE 10
FIGURE 1-6. LED CLUSTER ARRAY PAGE 11
FIGURE 20 JX GAS RESONANT CAVITY PAGE 12
FIGURE 1-7. ELECTRON EXTRACTION CIRCUIT PAGE 13
FIGURE 1-8. COVALENT LINKUP OF UNLIKE ATOMS PAGE 14
FIGURE 1-9. MAGNETIZED GAS LATTICE PAGE 15
FIGURE 1-10. STIMULATING AN ELECTROMAGNETIC ATOM PAGE 16
FIGURE 1-11. ELECTRICAL PARTICLE GENERATOR PAGE 17 .
APPENDIX TO MEMO 418
LIST OF PHOTGRAPHS, FIGURES AND EXHIBITS
FIG. 26 EPG PRINCIPLE: ALLOWING A PERMANENTLY MAGNETIZED FLUID MEDIUM TO PASS THROUGH A PICKUP COIL FIG. 26 C: MULTI-TIER EPG ELECTRICAL GENERATOR
FIG. 27 EPG MECHANICAL DRIVE GAS ACCELERATOR
FIG. 28 EPG ELECTRICAL MAGNETIC GAS ACCELERATOR
FIG. 29 EPG PHOTON DRIVE GAS ACCELERATOR
FIG. 30 LINEAR GAS COIL ACCELERATOR
PHOTO EXHIBIT ZX: EPG MECHANICAL DRIVE ASSEMBLY
PHOTO EXHIBIT ZY: EPG ELECTROMAGNETIC PUMP ASSEMBLY
PHOTO EXHIBIT ZB: MAGNETIC SPIN GENERATOR
PHOTO EXHIBIT JX: GAS RESONANT CAVITY ASSEMBLY
ELECTRONS: PARTICLES OF POWER*
ATTRACTION OF OPPOSITES*
NOTES: In the original document some pages were out of order and several figures inadvertently included twice.
The appropriate corrections were made in this edition with duplicate pages deleted and pages placed in the proper order.
*Also found in other Stan Meyer publications.
Above is a photo of one of Stanley's EPG system.
The EPG system or Electrical Particle Generator is basically a particle accelerator.
The EPG system is something that Stan was working on along with the Water Fuel Cell technology. It is suppose to be able to amplify the incoming signal/power to a much greater amperage / voltage.
It seems that not many people know that Stan was even working on this system. I have been doing extensive research and development on this system.
Some Important Notes from alot of study
After Studying Searl Magnetic SEG 2 things seam very apparent and possible with Stand machines
I call these Introvert (Stans Way) and extrovert.( electrons from our side tube)
The Stan Meyer Invert Method his stated method of having a magnetic gas move through tube,
could in fact be improved by have sensitive fer rite pickup inside the tube to make the voltage spikes, further enhancing stand magnetic stimulation of coils on outside of tube. Some of this was thought of as Searl Using the Gathering and Damming of electron using ferit in his system.
it could also extract elections from gas inside tube which is not necessary;y same as Stan methods
similar to a Magnetic Flow Meter which would increase sensitivity of a could pickup or magnetic movement of a pick up coil, ( as there seam to be some debate about the copper preventing the magnetic gas making flux in pick up coils coil.
It seams pulsing gas with LED Laser will cause lithium oxygen and h2 to cool and become magnetic.
Also of Large Turbine use pure h2 to cool the machines ,gas flows through and cool the steel
some run the gas through the stators.
it is total possible that h2 or Magnetic gas compose could impart more electrons into the stator by attracting electron from air.
And Such the Epg Stans Unit will get vert cold when gas flowing as a rate of speed through it
it will in fact attract electron from air these could be harvested just like searl did. As the Ionising and air will flow to centre of egp.
Further pulsing with laser will increase the effect
Scientists Create First Ever Magnetic Gas
By Stuart Fox September 18, 2009
For decades, scientists have debated whether or not gasses could display the same magnetic properties
as solids. Now, thanks to some MIT scientists, they know the answer is a freezing cold yes.
MIT researchers have observed magnetism in an atomic gas of lithium cooled down to 150 millionths
of a degree above absolute zero. This experiment represents a point of unification between condensed
matter research and the field of atomic science and lasers, and could influence areas such as data storage
and medical diagnostics.
To get the lithium gas so cold, the researchers trained an infrared laser beam on the gaseous cloud.
Laser cooling is the primary method physicists use to lower gas temperatures to near absolute zero.
The laser essentially stun the atoms, slowing them down, and thus lowering the temperature.
After initially growing, the cloud began to shrink. That shrinkage, combined with the speed of
expansion after the laser turned off, indicated that the lithium atoms had become magnetic.
"It's very important from an overall theoretical point of view because it gives us an understanding
of magnetism at its smallest possible scale," Scott Pritchard, an MIT professor, and one of
the experiment leaders, told us.
Improving magnetic gas directions or coil sensitivity
Backup of Video
This is my Copper EPG i will be using for testing. The wire will be installed next, at a bare minimum there will be close to 2 miles of AWG22 magnet wire on this EPG.
You can see my first attempt at the EPG using plastic at the end of this page.
Here is some of the progress i have made. The divider plates are installed, next i start the wire winding.
I'm building a wire winder (the wood in the background ) to help wind the 2+ miles of wire... thanks to YouTube user hawk491000 for the idea on the winder!
Update Photo Here: as of 2-8-12
Stanley A Meyer Mechanical Pump EPG coil parameters
The diameter of the outermost EPG channel or loop can be estimated.at about 17 inches
Therefore the outer circumference can be estimated at 17 x Pi inches
By dividing the circumference by the observed number of coils an estimated length of each coil can be made.
A further refinement in precision can be made by subtraction of the total length L occupied by coil spacers.
So in the case where you count, let's say as way of example, 59 coils and 60 coil end spacers, each winding is
1/59th of the circumference of 53.4 inches or calculated at about 0.905 inches long.
Because of the high resolution photographs available, estimates of a coil can be made directly.
Using a known measurement such as the outside diameter of tubing ie. 0.500 inches
in conjunction with a screen distance tool in Photoshop(r) or another program such as
Screen Caliper(r) the length of the coil can be made.
Since the outside diameter of the core channel is known, an estimate of the thickness of depth of winding
may be obtained by using photogrammetry to estimate the thickness of the winding.
The total thickness or height of the wound coil is first measured. Then the core diameter is then subtracted.
the resulting figure is then divided by two. This is the height or thickness of the winding around the core
So now we have what is call a winding window with height H and length L.
H TIMES L = A the area of the winding window. Think of it a a cross-sectional view of
the coil windings with the ends of each wire being viewed.
Something like this:
representing 3 layers of wire with 12 wraps (the II symbolizing the coil dividers)
3 layers of wire by 12 wires wide or 36 turns or wraps of wire around a bobbin
In this exsmple, a thinner wire could be wound 18 times on the same length of bobbin.
NUMBER OF WINDS
Since the gauge of the wire can be estimated with a good amount of precision
,the use of circle packing theory (see wiki) theory can be used to determine the
number of turns that can fit through this winding window( Area equals Height
One factor that helps, is that wires come in standard thicknesses or diameters
For convenience the AWG (American Wire Gauge) is used in electrical
and electronic work, Electrical wiring in the U.S. is often 10,12 or 14AWG
Electronic work is often uses 18,22, or 30 AWG gauge wire
Whatever the reason the smaller the AWG number, the thicker or larger
the diameter of wire!!
The reason this helps in photogrammetry, is that the gauges are discrete values
Look at this table:
AWG Diameter in inches AWG Diameter in Inches
10 .1019 20 .0320
12 .0808 22 .0253
14 .0641 24 .0201
16 .0508 26 &nbs